Plum Geek robotics products are now part of the Low Voltage Labs family of products
Born on Kickstarter March 2015Thanks to the excellent backers who have supported us through four successful Kickstarter campaigns!! We couldn't have done it without you!!
|
Ringo2 - The robot that started it all!Ringo was designed to inspire people learning to write code to breath life and real personality into their own robotic pet. He is loaded with tons of sensors allowing you to build thousands of possible behaviors.
|
Cute Pet, Mad Smarts
|
|
|
Getting Started (Setting up Ringo)Ringo Lessons - Lean to code!Ringo Software - Behaviors, Base Sketch |
Ringo for Educators
Ringo and Wink Comparision
|
|
Ninja Style AgilityRingo runs on a pair of micro DC motors. Each motor can be run forward or reverse with variable speed for fine movement control. His speed is amazingly fast. Any smooth surface or desktop is suitable.
|
|
Six RGB Color LightsThe six RGB "NeoPixel" lights can be made to show any color. A single line of code is all that's needed to control lights individually or together. Learning the code is easy. Concepts are easy to learn and encourage endless customization. View the Lights lesson here.
|
|
Barrier Detection Using Front IR SensorsRingo can detect objects and barriers when exploring. His front sensors allow for barrier detection. Interact with your hands, or adapt the behavior for obstacle avoidance and maze navigation.
|
|
Light SensingDetecting and reacting to light is easy. Ringo sports three ambient light sensors. One near each eye and one on the tail. Each are angled 120 degrees apart enabling 360 degree relative light sensing. Follow the light, run from the light, or do something interesting in response to the light. Easy.
|
|
Onboard Navigation - Accelerometer & GyroscopeRingo includes a 3-axis Accelerometer as well as a 3-axis Gyroscope enabling a complete inertial navigation platform. Use our pre-canned functions to move specific distances, make accurate turns, and react to outside stimulus like bumps or rotations.
|
|
Edge and Line DetectionRingo has three bottom sensors. One under each antenna and one under his tail. This allows autonomous behaviors for robot line following and edge detection.
|
Technical Details
Open Source Hardware: Ringo is open source hardware so you can learn about his parts and understand how they work.
Source Materials: https://github.com/plumgeek/PlumGeek-Ringo-Robot Schematic: https://github.com/plumgeek/PlumGeek-Ringo-Robot/raw/master/schematics/Schematic%20Ringo%20Rev04_02.pdf |
Based on Arduino UNO: Ringo uses the same microprocessor as the Arduino UNO, and runs at 8 MHz which is adequate for the functions Ringo will be expected to perform. You’ll use the Arduino IDE coding environment to write code for Ringo. He is fully compatible with all the functions and libraries available for the UNO board. We have also written some custom libraries and functions which do the heavy lifting when it comes to dealing with the accelerometer, gyro, and the math associated with calculating movements.
3-Axis Accelerometer: Can be used to sense movement in all 3 axis. Can also be used to determine the orientation of the robot as well tap detection. So you can trigger behaviors when the robot is moved or swatted by your cat. This sensor can be used as a basis to make Ringo travel specific distances, or when moved by an outside force to return to his starting position, etc. The part is a Freescale MMA8451QR1.
3-Axis Gyroscope: Can be used to determine which direction Ringo is facing. It works in all 3 axis, though the flat axis will be most useful as you can determine how far he has turned, or to cause him to turn a specific number of degrees. The part is an ST L3GD20TR.
Six RGB LEDs: Each of these LEDs can create a mix of red, green, and blue which basically allows you to create any color you want by mixing the three values. These are the same lights used in NeoPixel products from Adafruit Industries. (Thanks Limor!!!) The code to control the lights is super simple to use and the lights enable all kinds of expression. Two lights on the top, two on the bottom, and both eyes light up. Bling!
Sound Element: The piezo sound element can create any sort of pings, tones, and chrips you can think of. Can be used to give Ringo a voice as he explores his environment. Can also be used to play musical notes.
Light Sensors: Three sensors can measure ambient light 360 degrees around Ringo, allowing him to respond to light, shadows, etc.
Infrared Light Sources: Three IR light sources are placed pointed 120 degrees apart. They can be enabled individually in any pattern and can be driven together at the same time. This allows creating signals like those from a TV remote to communicate with other Ringo bots or control appliances like your TV. They can also be used together with the Light Sensors to detect objects or movement near Ringo.
38 kHz Receiver: This is a special sensor designed to sense the modulated light signal produced by most TV remote controls. Use the included remote or teach your Ringo to respond to your own remote. Imagine if each time you change a channel on your TV that Ringo dances around your coffee table. Cool!
Edge Sensors: A light sensor and an IR light source are hidden under each of Ringo’s feelers and also at the rear of Ringo. This allows him to sense edges and follow lines. We’ve had success creating mazes with lines or tape on a desk. What other uses can you come up with?
Charging: Ringo charges his battery automatically whenever plugged into the programming adaptor, or when a USB cable is connected directly to his USB port. (Note the USB port on Ringo does not provide any data communication, it is simply used as charging input). A “charging status” LED is provided so you can see when he has completed charging.
Pager Motors: The tips of the motors contact the running surface, allowing Ringo to skate around your table. Both motors can be controlled independently. They can run forward or backward at variable speed.
Programming Adaptor: The programming adaptor is a go-between for your computer and Ringo.
3-Axis Accelerometer: Can be used to sense movement in all 3 axis. Can also be used to determine the orientation of the robot as well tap detection. So you can trigger behaviors when the robot is moved or swatted by your cat. This sensor can be used as a basis to make Ringo travel specific distances, or when moved by an outside force to return to his starting position, etc. The part is a Freescale MMA8451QR1.
3-Axis Gyroscope: Can be used to determine which direction Ringo is facing. It works in all 3 axis, though the flat axis will be most useful as you can determine how far he has turned, or to cause him to turn a specific number of degrees. The part is an ST L3GD20TR.
Six RGB LEDs: Each of these LEDs can create a mix of red, green, and blue which basically allows you to create any color you want by mixing the three values. These are the same lights used in NeoPixel products from Adafruit Industries. (Thanks Limor!!!) The code to control the lights is super simple to use and the lights enable all kinds of expression. Two lights on the top, two on the bottom, and both eyes light up. Bling!
Sound Element: The piezo sound element can create any sort of pings, tones, and chrips you can think of. Can be used to give Ringo a voice as he explores his environment. Can also be used to play musical notes.
Light Sensors: Three sensors can measure ambient light 360 degrees around Ringo, allowing him to respond to light, shadows, etc.
Infrared Light Sources: Three IR light sources are placed pointed 120 degrees apart. They can be enabled individually in any pattern and can be driven together at the same time. This allows creating signals like those from a TV remote to communicate with other Ringo bots or control appliances like your TV. They can also be used together with the Light Sensors to detect objects or movement near Ringo.
38 kHz Receiver: This is a special sensor designed to sense the modulated light signal produced by most TV remote controls. Use the included remote or teach your Ringo to respond to your own remote. Imagine if each time you change a channel on your TV that Ringo dances around your coffee table. Cool!
Edge Sensors: A light sensor and an IR light source are hidden under each of Ringo’s feelers and also at the rear of Ringo. This allows him to sense edges and follow lines. We’ve had success creating mazes with lines or tape on a desk. What other uses can you come up with?
Charging: Ringo charges his battery automatically whenever plugged into the programming adaptor, or when a USB cable is connected directly to his USB port. (Note the USB port on Ringo does not provide any data communication, it is simply used as charging input). A “charging status” LED is provided so you can see when he has completed charging.
Pager Motors: The tips of the motors contact the running surface, allowing Ringo to skate around your table. Both motors can be controlled independently. They can run forward or backward at variable speed.
Programming Adaptor: The programming adaptor is a go-between for your computer and Ringo.